Name: E85 Ethanol kit 3CYL/4CYL factory compatible with 98% of gasoline vehicles 3cyl/4CYL , Ethanol car Gasoline modification Accessories E85
Brand: AUTOPVISION
SKU: SHX-3CYL-A-YUMI
Price: 129.0 EUR
Availability: InStock

Do you Know What is E85 Conversion Kit?

E85 Conversion Kits are digital, fully automatic E85 Ethanol Conversion Kit, which allows to run 98% of gasoline powered vehicles on Ethanol E85 (also known as Bioethanol or Flex Fuel Ethanol) and save up to 40% on every tank fill. Easy to install, E85+ Conversion kit is compatible with 98% of gasoline vehicles with electronic fuel injection, manufactured after 1990 (not compatible with the systems K-Jetronic / Direct Injection / Carburetors). After installation, gasoline car will become a Flex Fuel vehicle which can run either on E85 Ethanol or gasoline. E85 Flex Fuel Conversion Kit ( 3/ 4 Cylinder optional)

Product descriptions:

E85 flex fuel ethanol alternative fuel allows gasoline only vehicles to run on ethanol as an alternative fuel.
Flex fuel ethanol alternative fuel installs as a plug and play device in the vehicles fuel Injection system, by means of rerouting the signal from the E. C. M. to the fuel injectors.
We provide OEM manufacturing service for world distributors on E85 industry;
We offer full series e85 flex fuel ethanol alternative fuel, consist of 3,4 Cyl models with connector types available for EV1, EV6, Nippon Denso, Delphi, Toyota and Honda.
Flex fuel ethanol alternative fuel with TRUE cold starting asst. technology and with built in temp. sensor. That kits will, of course, be easy for your engine cold start, when temp. drops below 10°C.
Flex fuel ethanol alternative fuel are CE approved and compliance with European directives: EMC 2004/108/EC, EN55022: 2010, EN61000-3-2:2006+A1:2009+A2:2009, EN61000-3-3:2008, EN55024:2010
Flex fuel ethanol alternative fuel with industrial longest 5years' factory warranty(5years' on circuit board and rest one year on other mechanical parts, such as harnesses and connectors)

Main Features:

Flex fuel ethanol alternative fuel works on your vehicles OBD2 emissions and fuel mapping systems which creates an automated transition between gas and ethanol. Since the fuel map is automatically set for your vehicle, you just need to fill up with whichever mixture of ethanol and gas you choose.
Better solutions to existing vehicles and also new and different technologies as auto manufacturers come out; compliance with Multi-Displacement System (MDS) gasoline engines.
Flex fuel ethanol alternative fuel has a new feature that stabilizes voltage signal to the microprocessor in case customer has high amp draw (big stereos, etc.)

Key Points:

1. BUILT IN TEMP. SENSOR

2. COLD START ASST / Cold Engine Starting Asst ;

3. 3,4 Cyl models with connector types;

4. CE approved and compliance with European directives

5. Good Quality, with industrial longest 5years' factory warranty ;

6. flex fuel ethanol alternative fuel with Competitive price;

Please know :

1.E85 injection system and adjust air/fuel ratio automatically.

2. E85 injection, manufactured after 1990 (not compatible with the systems K-Jetronic / Direct Injection / Carburetors).

3. E85 kit, is fit to typical manifold fuel injection gasoline engines, with DC12V on battery, fuel injector\'s impedance 9-22Ohms. Partial cars with 4V DC power, not fit to our kits.

Before installation, you have to check the polarity of your car original fuel injection system, normally, the common colored wire between each fuel injection connector is power wire (+12V wire), it should be connected with our kit power wire (Red Wire) as well. Once you verify the polarity of your car original fuel connector, you then attach the male connector of our kit with the male terminals; be minded, in any case, the red wire of our male / female connector should be in a line after connector attached. You can also refer to the guide of "know how on polarity change on our kit" to know more details about the steps. Pls do not forget to attach the earthing terminal onto the battery negative pole after installation.

Our kit is fit to 12V DC charging system with fuel injector impedance 9 Ohms or above; most of the cars manufactured after 1996 figured with 9-22 Ohms. In case of the injector has 12V DC but low ohms, e.g 2.8-3 ohms, the car can start with our kit but ran jerk not smooth. And for very seldom cars with 3.8-4 V DC, not fit to our conversion system, as well.

REAL PHOTO: